Player Usage; Power On / Off; Menu Language; External Hdd Format - IconBiT XDS100GL User Manual

Multimedia hd-player
Table of Contents

Advertisement

iconBIT XDS100GL User Manual

2.6 Player Usage

2.6.1 Power On / Off

Power On
After connecting the DC IN jack and press the power button on the remote control, the
player will soon enter the home screen, and the power indicator will turn blue.
Power Off
Press the power button on the remote control, the player will soon enter standby mode, and
the power indicator will turn red. Then unplug the power cord to cut off the power supply.

2.6.2 Menu language

The system language of this player can be set to English or other languages. Change the
language you wish in the setup menu, the selected language will take effect immediately.

2.6.3 External HDD Format

For users who wish to use BT download, Transmission, you need format the external hard
disk on the player before usage. Please refer to the following procedures to format the hard
disk.
Step 1: Select OK on the Warning page, press OK to confirm.
Note: This page can be also accessed via Setup->System-> Format menu.
A password needed when you try to format the HDD, please refer to '3.1.6 MISC ' for more
details about the password.
Step 2: Select Format, press OK, and then hard disk format will start.
The formatting procedure will be finished within a few minutes. And then you can use the
hard disk properly on the player.
Note: HDD format will remove all data stored on the hard disk drive. Please take care and
backup your data in advance!
14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XDS100GL and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents