Table of Contents
Advertisement
[MWI]
Use_MWI = 1 / min: 0(not use), max : 1 (use): Message waiting indication
Use_Subscribe = 1 / min: 0(not use), max : 1 (use): Message subscribe
Subscribe_Server ="null" min: 0, max :50 chars (sending subscribe server address, Null case SIP sever
suscribe)
Subscribe_Expire = 3600 / min: 180, max :65535(sec)
VMS_Alias = "" / min: 0, max :40 chars(Setting MWI number account)
[WIFI]
Enable_Check_Server_Cert = 0 / min : 0, max : 1 (BOOL) change to be enabled to check certification of
server
[WIFI_SCAN]
scan_channel_list : 1,2,3,4,5,6,7,8,9,10,11,12,13 ,14 / min: 0, max : 40 chars channel
Making CSV Format 1~ 14 using channel(default 1~14 included)
[ROAMING]
Try_Beacon_Signal_Level = -77 / min :-103, max : 0
Try to roaming if received beacon frame is signal strength less than setting value
Try_Rx_Signal_Level = -77/ min :-103, max : 0(signal level(dBm))
Try_Over_TxError_Count = 5 / min:0 , max : 255
Try to roaming if Tx error is continuously occurred more than setting value
[NETWORK1]
Enable = 1 / min : 0, max : 1 (BOOL)
SIP_Outbound_Proxy = "0.0.0.0" / min :0, max : 50 chars
SSID = voip / min :0, max : 32 chars
Enable_DHCP = 1 / min : 0, max : 1 (BOOL)
Address = 0.0.0.0 / IP Address Format
Netmask = 255.255.255.0 / IP Address Format
37
Advertisement
Table of Contents
