UniData Communication Systems WPU-7700 Administrator's Manual page 29

Enterprise edition
Hide thumbs Also See for WPU-7700:
Table of Contents

Advertisement

RSSI: Received Signal Strength Indication (dBm)
SNR: Signal to Noise Ratio (dBm)
NF: Noise Floor (dBm)
RP: Rx Packet Count/Rx Bytes
TP: Tx Packet Count/Tx Bytes
RE: Rx Error Count/Rx Dropped Count/Rx Length Error Count TE: Tx Error Count/Tx Dropped Count
FC : Tx Failed Count - Increments when a MSDU is not successfully transmitted
RC : Retry Count - Increments when a MSDU is successfully transmitted after one or more
retransmissions
MRC : Multiple Retry Count - Increments when a MSDU is successfully transmitted after more than one
retransmission
FDC : Frame Duplicate Count - Increments when a frame is received that the Sequence Control field is
indicating a duplicate count
RSC : RTS Success Count - Increments when a CTS is received in response to an RTS
RFC : RTS Failure Count - Increments when a CTS is not received in response to an RTS
AFC : Ack Failure Count - Increments when an Ack is not received when expected
FEC : FCS Error Count - Increments when a FCS error is detected in a received MPDU
TFC : Transmitted Frame Count - Increments for each successfully transmitted MSDU
WUC : WEP Undecryptable Count - Increments when a frame is received with the WEP subfield of the
Frame Control filed set to one The WEP On value for the key mapped to the TA's MAC address indicates
that the frame is not encrypted or frame is discarded because the receiving station is not implementing the
privacy option
Scanned AP
Scanned AP: Searched units of AP around.
0 channel: AP units of present-associated channel
28

Advertisement

Table of Contents
loading

Table of Contents