System Password; Changing The Password - Orchid Telecom PBX 308 System Administration Manual

All programming is done on Extension 201 ONLY.
NOTE: If Programming is done successfully you will hear a Beep, if unsuccessful you will hear a
Series of Beeps.

System Password

The factory default password is: * 0 1 (1234) #

Changing the Password

Off Hook
Ext 201
NB: Your new Password will be: * 0 1 xxxx #
If you change the programming Extension 201 to Direct Dial mode (page 6) you will
need to dial a * in front of the Password ie: * * 01 1234 # 2
When you enter the programming mode on 201 all the other Extensions will be cut off.
Therefore ensure that other Extensions are not on calls before you start programming.
We strongly recommend that you store your new password into a one-touch memory.
This will simplify all future programming.
Dial: Current Password * 0 1 1234 #
Dial: New Password * 0 2 xxxx # On Hook
Ext 201
5