Thank you for choosing the Orchid Telecom PBX 308. Please take time to read through this
Administration guide to get the most from your new purchase.
• Ensure power On/Off switch located on the left hand side of the PBX is switched to On.
• All extension sockets should be Master type with built in ringing capacitor. (If you use a
secondary type socket, and your extension phones are older type 4-wire working, they will
not ring). We have a range of "Easy Install" adaptors for connecting the extensions. They
are available in 4 lengths; 10cm, 5m, 10m and 20m. Please contact your supplier for more
details.
• Only extensions 201-204 will ring on incoming calls (factory default setting) unless you
nominate any other extensions to ring. See page 5 of the Administration Guide.
• The Exchange Lines should be connected to the PBX using the telephone leads supplied
Wall Mounting:
• Drill 2 holes, 16cm apart. (Take extra care not to drill through electrical wiring or pipes.)
• Adjust the screw heads until the PBX fits firmly against the wall.
4