Cushman 622023 Owner's Manual page 30

INTRODUCTION
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
18
3
13
19
16 17
15
14
Before attempting to tow vehicle, move the Run-Tow/Maintenance switch to the 'Tow/Maintenance' position. Failure
to do so will damage the controller or motor.
Before disconnecting or connecting a battery, or any other wiring, move the Run-Tow/Maintenance switch to the
'Tow/Maintenance' position.
After connecting a battery, or any other wiring, wait a minimum of 30 seconds before moving the Run-Tow/Mainte-
nance switch to the 'Run' position.
The Run/Tow switch should always be returned to the 'TOW' position after moving a stalled vehicle. If the switch is left in the
'RUN' position for an extended period of time, it will drain the batteries.
The Run/Tow switch is located under the seat on the passenger side of the vehicle.
With the switch in 'TOW/MAINTENANCE' position:
• the controller is deactivated
3 - 6