ECS A13G Series User Manual page 29

Motherboard User's Guide
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was written for an
earlier generation of processors. Leave this item at the default value.
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to set the typematic rate
and the typematic delay settings for your keyboard.
• Typematic Rate (Chars/Sec): Use this item to define how many charac-
ters per second are generated by a held-down key.
• Typematic Delay (Msec): Use this item to define how many millisec-
onds must elapse before a held-down key begins generating repeat char-
acters.
Security Option (Setup)
If you have installed password protection, this item defines if the password is
required at system start up, or if it is only required when a user tries to enter the
Setup Utility.
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP)
for systems, allowing support for up to 60 processors.
MPS Version Control For OS (1.4)
This item displays MPS version control for OS.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the
default.
Small Logo (EPA) Show (Disabled)
Enables or disables the display of the EPA logo during boot.
Summary Screen Show ( Enabled)
This item determines whether the summary system information will be showed
during boot-up.
ATA 66/100 IDE Cable Msg. (Enabled)
This item enables or disables the display of the ATA 66/100 Cable MSG.
BIOS Write Protect (Disabled)
This item enables or disables the BIOS write protect.
BIOS Bootblock Protect (Disabled)
This item enables or disables the BIOS bootblock protect.
26