Hood Safety Feature; Modifying The Safety Mode Connected With The Hood Lid; Maintenance; Spare Parts - Santos BRUSHLESS BLENDER 62 User And Maintenance Manual

SANTOS: User and maintenance manual

HOOD SAFETY FEATURE

Note: the appliance will not start unless the hood lid (8) is
closed.

Modifying the safety mode connected with the hood lid

"Pause" mode (by default)
While a cycle is running, opening the hood makes the
motor stop but does not clear the key that is active. When
the hood is closed again, the cycle resumes.
Note: the current cycle will be de-activated if the sound-
proofing hood remains open for more than 30 seconds.
"Quick stop" mode
Opening the hood makes the motor stop and de-activates the key that was selected.
This code: "4 – P – 1" provides the means for switching from one mode to the other

MAINTENANCE

Prior to carrying out any intervention on the appliance, it must be disconnected from the
mains without fail.

Spare parts:

This appliance requires no specific maintenance. The bearings are lubricated for life.
If any intervention is necessary to replace parts subject to wear, such as the bearing,
blade, electrical or other components, please refer to the parts list (see the exploded view
at the end of this manual).
Whenever ordering spare parts (see references in the exploded view at the end of this
manual), please quote the following:
 the type
 the appliance serial number and
 the electrical specifications (16)
given under the appliance.

Changing the drive system:

Motor drive (female):
Hold the motor drive (20) in position with multiple slip
joint pliers, and unscrew the fixing screw (19) using a
TORX wrench (anticlockwise)
98162 EN 1.5 - 02 2014
!
12 / 23
19
20
www.santos.fr