Installing the Web Management
Utility
Through the Web browser you can configure switch functions such as
VLAN, Trunking, QoS... etc.
The following instruction guides you to install the Web Management
utility.
1.
Insert the Utility CD in the CD-ROM Drive.
2.
From the Start menu on the Windows desktop, choose Run.
3.
In the Run dialog box, type D:\Web Management Utility\setup.exe
(D:\ depends where your CD-ROM drive is located) and click OK.
4.
Follow the on-screen instructions to install the utility.
5.
Upon completion, go to Program Files ->
web_management_utility and execute the Web Management
utility. (Figure 1.)
Configuring the Switch
The DES-1250G has a Web GUI interface for smart switch
configuration. The Switch can be configured through the Web browser.
A network administrator can manage, control and monitor the switch
from the local LAN. This section indicates how to configure the Switch
to enable its smart functions.
Use Internet Explorer 5.0 or above Web browser.
Figure 1. Web Management Utility
6