Specifications - Ryobi RPP720G Operator's Manual

V
A
Hz
W
hrs
n
o
.../min

SPECIFICATIONS

Voltage :.................................................... 220-240V/50Hz
Power : ....................................................................720 W
Bar Length : ............................................... 200mm/ 8 inch
Chain Pitch :.............................................9.5mm/ 3/8 inch
Chain type : ............... Low Profile Skip Tooth Narrow Kerf
Voltage
Current
Frequency (cycles per second)
Power
Time
Double-insulated construction
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator's manual before
using this product.
Wear eye protection when operating this equipment.
Wear ear protection when operating this equipment.
Wear non-slip, heavy-duty protective gloves when handling the pole saw and the blade.
Keep all bystanders at least 15m away.
Remove plug from the mains immediately if cable is damaged or cut.
Do not touch the moving blade.
Electrical hazard, at least 15m away from the overhead lines
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
ENGLISH
SYMBOLS
Weight : .................................................................... 3.5kg
Sound Pressure Level : .......................................89 dB(A)
Sound Power Level : .........................................105 dB(A)
Vibration level : ................................................... 2.44 m/s²