Preventive Maintenance; Symbols And Warnings; Symbol Explanations - Philips burton SUPER EXAM 50 LED Instructions For Use & Maintenance

2 5 Preventive Maintenance
Check Corrective Action
Weekly
•
Check overall operation of the fixture:
Does the switch and LEOs operate prop-
erly?
If the answer to any of these questions
•
Does the lighthead stay in position (not
is NO, do not use the product. Consult
drift) when the arm is moved up and
with your maintenance personnel be-
down, or to the sides?
fore operating the light.
•
Do all components appear secure
(Iighthead, arm attachment points,
upright connection to the base)?
Monthly
•
Check the floor model upright for
"wobble". (If loose, the light is offset
Tighten the screw under the base
and could tip over).
housing.
•
Check that the mount (wall, table, rail,
Tighten the mounting screw
or ceiling) is secure to the mounting
(or C-clamp for the table mount).
surface.
Annually
•
Check the same items as for weekly
and monthly maintenance.
If the answer to any of the questions is
NO, do not use the product. Consult
•
Inspect the power cord for external
with your maintenance personnel
abrasion.
before operating the light.
•
Lightly pull and twist the cord at the
inlet strain relief to test for internal Any flickering is indicative of an
conductor breakage when the light is
intermittent break, and the cord should
energized.
be replaced. Replace as necessary.
•
Check electrical connectors for
evidence of overheating (charring,
discoloration) and chafed insulation.
3. Symbols and Warnings
3.1 Symbol Explanations
-
Do not throwaway. Electronic waste: the product must be recycled.
CE
<S)
We conform to the relevant European Directive(s).
Intertek Intertek, Semko - Europe
This symbol references a protective "ground" or "earth" connection.
17