Table of Contents
Advertisement
Connecting to an HDTV with a DVI Connector
Cables Used in this Confi guration
• 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line]
instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV's
capabilities.)
Notes:
• The DVI port on the TV must support high-bandwidth digital content protection (HDCP).
• When you connect the HDMI connector to the DVI connector on your HDTV, you need an
HDMI-to-DVI adapter and a separate audio connection.
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
TO WALL
TO TV
(VIDEO IN)
(VIDEO OUT)
Back of HDTV
S-VIDEO
VIDEO
L/
MONO
AUDIO
R
16
Pb
Pr
NETWORK
eSATA
OPTICAL
INPUT
Y
P
L
B
AUDIO
P
R
R
HD 1
IN
IN
Y
L
VIDEO
AUDIO
AUDIO
S-VIDEO
OUT
OUT
OUT
OR
AUDIO
DVI/HDCP
CENTER
CHANNEL IN
ON
OFF
AUDIO IN
DVI/HDCP
R
L
ANT (75 )
VIDEO
Y
L/
ANT-1
P
L
MONO
B
AUDIO
R
P
R
OUT
R
HD 2
ANT-2
OUT
IN
R
OPTICAL
HDMI
IN
USB
POWER
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ISB7000 and is the answer not in the manual?
Questions and answers
How do I configure the ISB7500 DVR to record and play back from TV's in multiple rooms while connected via ethernet
The Cisco ISB7000 DVR is designed to use your in-home IP network for multi-room DVR functionality. To configure it for recording and playback on TVs in multiple rooms using Ethernet:
1. Connect the DVR to the Ethernet network: Plug an Ethernet (CAT-5) cable from your home network into the "Network" port on the back of the DVR.
2. Ensure all TVs are connected to the same network: Verify that all TVs you want to use for playback are connected to the same in-home IP network. This can be done through Ethernet or compatible network devices.
3. Activate Total Home DVR service: Contact your service provider to ensure the Total Home DVR service is activated. This service allows recording and playback on multiple TVs.
Once set up, you will be able to:
- Record shows on the DVR and play them back on any connected TV.
- Pause, fast-forward, and rewind recorded content from any room.
- Pause a recorded show in one room and resume it in another.
This answer is automatically generated