Keychain Remote - LifeShield Home Security System Quick Setup Manual

2
Connect Console
CONNECT THE BATTERY AND PLUG IN THE CONSOLE
MOUNT THE CONSOLE
If the will be mounted on a wall:
F
• Select the wall location and mark the spots on the wall where
the upper and lower screws will go using the mounting plate as
a template
• Drill 3/16" holes and insert the drywall anchors provided
• Screw mounting screws into the anchors, leaving the heads
about 3/8" away from the wall
• After checking that the power cord is in place correctly, attach
to the wall mounting plate to the
• Place the
• Plug the power cord into the outlet
3

Keychain Remote

*Your master code can be found on the inside of this Setup Guide
no more than 100 feet from the Base or Cellular Gateway
with wall mounting plate onto the wall screws
Console
Mark spot
on the wall
support.lifeshield.com/console-trouble
support.lifeshield.com/keychain-trouble
Power Cord
F
Keychain
Remote
Table Stand
6