LifeShield Home Security System Quick Setup Manual page 11

CONTROL YOUR SYSTEM
STAY ARMING
Use while you are staying in
your home. Your system will
provide an Exit Delay and an
Entry Delay. This mode will also
ignore specific sensors not set for
DEFINITION
Stay mode (for example Motion
Sensors as typically only used in
Away mode). During Exit Delay,
the beep will increase during the
last 10 seconds of arming.
Press STAY on your
Console and enter your
Master Code*
If One Touch Arming is
enabled, press and hold
STAY on your Console
CONSOLE
Your system is armed
when the Exit Delay
has expired
Press and hold STAY
on the Keychain Remote
for 2 seconds
The system will respond
KEYCHAIN REMOTE
with a blinking light and
a beep letting you know
your system is armed
Login to LifeShield at
customers.lifeshield.com
At the top of the
SECURITY PORTAL
webpage, click the
(LIFESHIELD WEB)
icon of the house with
a person inside of it
labeled "STAY"
Drag the lock icon to
the STAY arming symbol
(the house with a person
and clock)
MOBILE APP
Enter your Master Code*
Drag the lock icon to
the STAY arming symbol
(the house with a person
and clock)
SECURITY TOUCHPAD/
Enter your Master Code*
TABLET APP
*Your master code can be found on the inside cover of this Setup Guide
AWAY ARMING INSTANT ARMING
Use when no one is at home. Use when you are in for the night
Your system will provide an and not expecting anyone to enter
Exit Delay and an Entry Delay. or exit the home. Your system
During Exit Delay, the beep will not provide an Exit Delay or
will increase during the last 10 Entry Delay. This mode will also
seconds of arming. ignore specific sensors not set for
Stay mode (for example Motion
Sensors as typically only used in
Away mode).
Press AWAY on your Press INSTANT on your
Console and enter your Console and enter your
Master Code* Master Code*
If One Touch Arming is If One Touch Arming is
enabled, press and hold enabled, press and
AWAY on your Console hold INSTANT on
your Console
Your system is armed when
the Exit Delay has expired
NOTE: If a door doesn't open and
close during the exit delay, the
system will automatically switch
the arming mode to STAY
Press and hold AWAY
on the Keychain Remote
for 2 seconds
The system will respond
with a blinking light and
a beep letting you know
your system is armed
Login to LifeShield at Login to LifeShield at
customers.lifeshield.com customers.lifeshield.com
At the top of the At the top of the
webpage, click the webpage, click the
icon of the empty icon of the Shield
house labeled labeled "INSTANT"
"AWAY"
Drag the lock icon Drag the lock icon to
to the AWAY arming the INSTANT arming
symbol (the house symbol (the house with
with the shield) a person and lightning
bolt)
Enter your Master Code*
Enter your Master Code*
Drag the lock icon to the Drag the lock icon to the
AWAY arming symbol INSTANT arming symbol
(the house with the (the house with a person
shield) and lightning bolt)
Enter your Master Code* Enter your Master Code*
DISARMING
Use this whenever you want to
cancel any alarm you've caused.
Press CANCEL/OFF
on your Console and
enter your Master Code*
Press Cancel/OFF
to disarm the system
before entering
Not available on the The system will respond
with a light and a beep
Keychain Remote
letting you know your
system is disarmed
Login to LifeShield at
customers.lifeshield.com
At the top of the
webpage, click the
DISARM button
Drag the lock icon to
the Unlock icon labeled
"Disarm"
Enter your Master Code*
Drag the lock icon to
the Unlock icon labeled
"Disarm"
Enter your Master Code*
PANICKING
YOUR SYSTEM
Use this mode to send an
immediate signal to the
Monitoring Center, who will then
dispatch the proper authorities.
When panicking your system,
you are required to select the
emergency type (Police, Fire,
Medical) before the signal is sent.
NOTE: Do not test your system
with the Panic Button.
Press and hold PANIC for
2 seconds (if enabled)
Select Police, Fire, or Medical
Press and hold STAY and
AWAY at the same time
for 2 seconds (if enabled
and you're within range
of the system)
Not available through
LifeShield Web
Not available on the
Mobile Application
Press the PANIC button in
the upper right-hand corner
of the screen
Choose your type of Panic
Will only work when the
device is in the same
wireless network as your
system