Remote Key - Range; Detachable Key Blade - General Information; Detachable Key Blade - Detaching/ Reinserting - Volvo S60 Owner's Manual

Hide thumbs Also See for S60:
Table of Contents

Advertisement

06 Locks and alarm
Remote key – range
The remote key has a range of approximately
60 ft. (20 m) from the vehicle.
NOTE
Buildings or other obstacles may interfere
with the function of the remote key. The
vehicle can also be locked or unlocked
with the key blade, see Alarm-related func-
tions (p. 157).
If the remote key is removed from the vehicle
while the engine is running or if the ignition is
in mode I or II and all of the doors are closed,
a message will appear in the instrument panel
display and there will be an audible signal.
When the remote key is returned to the vehi-
cle, the message will be erased and the audi-
ble signal will stop after one of the following
has been done:
The remote key is inserted in the ignition
06
slot
The vehicle's speed exceeds 20 mph
(30 km/h)
The OK button on the left steering wheel
lever is pressed
Related information
Remote key – functions (p. 141)
142
Detachable key blade – general
information
Each remote key contains a detachable metal
key blade (p. 138) for mechanically locking or
unlocking the driver's door and the glove
compartment, and to enable the valet lock-
ing (p. 144) function. The key blades have a
unique code, which is used if new ones need
to be produced. This code is available at an
authorized Volvo retailer.
The visible ends of these key blades are
unique to make it easier to identify "your"
remote key.
Related information
Detachable key blade – unlocking
(p. 143)
Detachable key blade – detaching/rein-
serting (p. 142)
Detachable key blade – detaching/
reinserting
The detachable key blade (p. 142) can be
removed or reinserted in the remote key as
follows:
Removing the key blade
Slide the spring loaded catch to the side.
Pull the key blade straight out of the
remote key.
Reinserting the blade
1. Hold the remote key with the slot for the
key blade up.
2. Carefully slide the key blade into its
groove.
3. Gently press the key blade in the groove
until it clicks into place.

Advertisement

Table of Contents
loading

Table of Contents