Volvo S60 Owner's Manual page 116

03 Instruments and controls
||
Function
Contrast mode / Color mode
Service status
Information headings
Three trip computer headings can be dis-
03
played at the same time; one in each of the
displays (see the previous illustration). One of
the combinations of information headings in
the following table can be displayed. To do
so:
Average fuel consump-
tion
Current fuel consumption
Current fuel consumption
-
Scroll among the trip computer information
headings at any time by turning the thumb
wheel until the desired heading is displayed.
114
Description
Adjust the instrument panel's contrast and color.
Shows the number of months and mileage until the next scheduled service.
1. Ensure that none of the trip computer
controls are being used in a command
sequence; reset them by pressing RESET
twice.
2. Turn the thumb wheel to begin display-
ing the combinations of information head-
ings. Stop on the desired combination.
Heading combinations
Trip odometer T1 + mile-
age
Trip odometer T2 + mile-
age
Mileage
No trip computer informa-
tion displayed
Related information
•
Trip computer – introduction (p. 109)
•
Trip computer – functions, analog instru-
ment panel (p. 110)
Description
•
Press and hold RESET to reset trip odometer T1.
Average speed
•
Distance to empty Press and hold RESET to reset trip odometer T2.
mph<>km/h Change between mph<>km/h – see "Digital speed display" in Trip
computer – Supplementary information (p. 115).
- No information will be displayed. This also indicates the begin-
ning/end of the list of information headings.
3. See the table for an explanation of the
heading or the actions that can be taken.
Scroll among the combinations of trip com-
puter information headings at any time by
turning the thumb wheel until the desired
combination is displayed.
•
Trip computer – Supplementary informa-
tion (p. 115)
•
Trip computer – Trip statistics (p. 116)