Advertisement
Paper Jams and overload protection:
Cross-Cut shredder X7CD is equipped with a motor overload protection device. The
normal short duty cycle for continuous shredding at maximum capacity is 2 minutes.
The power may terminate automatically in case of the following abnormal situations:
1. Operating the shredder at the maximum capacity continuously for a prolonged
period of time, e.g. More than 2 minutes for computer paper and CD/DVD or credit
card without stopping.
2. Exceeding the shredding capacity e.g. inserting more than ten (7) sheets at one
pass, or if the paper is not fed squarely into the feed opening.
Both abnormal operations may result in the activation of the automatic motor overload
protection, which terminates the power to the unit .If this occurs, you should:
1. Unplug the power cord from the AC outlet to allow shredder to cool down. Tear or
cut off any excess paper from the top of the shredder.
2. Plug the power cord back into the AC outlet and place the Switch in REV. Pull the
remaining paper out of the cutters. Place the Switch back to the Auto position if
necessary clear the feed opening of any remaining shredded pieces of paper, Keep
fingers away from feed opening to avoid harm.
3. With the Main Switch in the AUTO position and the feed opening clear, you are now
ready to resume normal shredding .
Specifications:
Shred type:
Shred Size:
Shredding Capacity:
Feed Opening:
Feed Opening for CD/DVDs:
Input:
Shredding speed:
Basket capacity:
Warranty
The warranty for this appliance is for 12 months from the date of purchase. The
appliance has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim, please
make contact by telephone with our Customer Service.
Cross cut
4x45 mm
10 Sheets or 1pc CD/DVD, or 1pc credit card
220mm for paper
120mm
220-240 VAC, 50HZ
2.3m/min (7 sheets)
15 L
- 4 -
Advertisement
