Advertisement
Quick Links
Advertisement
Summary of Contents for Ednet S7-CD
- Page 1 Strip-Cut Shredder S7-CD Manual 91605...
-
Page 2: Intended Use
Thank you for buying this high-quality product. Please carefully read through these operating instructions before using the device for the first time. In particular, please comply with the safety notices. Intended Use: The shredder is only suitable for shredding of paper, credit cards and CDs. Any other use or modification shall be deemed to be improper and involves substantial risk of accidents. -
Page 3: Important Note
7. The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting and cleaning the device and prior to emptying the waste basket to avoid the danger of injuries. 8. Empty the waste basket frequently. Otherwise the shredder may jam. 9. - Page 4 Capacity of the document shredder: Strip-Cut Shredder S7-CD shreds up to 7 sheets of paper (DIN A4, 70g). The paper width may comprise up to 22 cm. When shredding small paper sizes such as letters or credit card receipts, please insert them into the middle of the shredding slot.
- Page 5 Protection against paper jams and overloading: Strip-Cut Shredder S7-CD is equipped with a motor overload guard. The normal work cycle for the shredding operation takes 2 minutes with a maximum load, after which a prolonged break must be taken.
-
Page 6: Technical Data
2. Reconnect the main plug to the AC socket and set the switch to the REV position. Pull the remaining paper away from the shredding blades. Afterwards, set the switch back to the AUTO position. If necessary, repeat this step. 3.