Advertisement
Quick Links
Shredder X10 CD
with separate cutting unit for CDs/DVDs and credit cards
Manual
91608
This device is solely intended to shred/destroy a maximum of 10 (unstapled) sheets of paper
per operation. Any other use is deemed incorrect use and thus will invalidate the extended
warranty and endanger your safety. The device cannot shred laminated paper or plastic
sleeves and will be irreparably damaged if used in this way.
Advertisement
Related Manuals for Ednet X10 CD
Summary of Contents for Ednet X10 CD
- Page 1 Shredder X10 CD with separate cutting unit for CDs/DVDs and credit cards Manual 91608 This device is solely intended to shred/destroy a maximum of 10 (unstapled) sheets of paper per operation. Any other use is deemed incorrect use and thus will invalidate the extended warranty and endanger your safety.
-
Page 2: Safety Precautions
Safety precautions: Warning: Read through these operating instructions before starting to use the device and keep them safe for later consultation. To avoid injury, keep long and/or lightweight objects, such as clothing (scarves, ties, etc.), jewellery (necklaces, bracelets, etc.) as well as long hair away from the opening where paper is inserted. -
Page 3: Operating The Shredder
Placing the shredder: 1. Place the device on a smooth and flat surface. 2. Ensure the device is positioned in a distance from heaters or other sources of heat. 3. Where possible, avoid using extension cables or multi-way sockets. It is advisable to connect the device directly to the wall socket using the power cable (in accordance with the technical specifications). - Page 4 Shredder capacity: The 91608 is capable of shredding up to 10 sheets of paper (DIN A4, 80g/m²) at once. Paper width may not exceed 22cm. When shredding small pieces of paper, such as envelopes or credit card receipts, the paper should be inserted in the middle of the opening. Please ensure that you never insert more than the stated maximum quantity into the cutting unit as this may damage the device.
-
Page 5: Turning Off
Removal of leftover paper: Set the switch to “OFF” and unplug the power socket. Remove the shredding attachment, and then you will able to take out any scraps of paper that have become caught in the cutting unit. The blades are very sharp so you should proceed with extra caution! Place the shredder attachment back on top, plug in the power socket and turn the device on again.