Advertisement
Removal of leftover paper:
Set the switch to "OFF" and unplug the power socket. Remove the shredding attachment, and
then you will able to take out any scraps of paper that have become caught in the cutting unit.
The blades are very sharp so you should proceed with extra caution! Place the shredder
attachment back on top, plug in the power socket and turn the device on again. You will then
be able to start using the device again.
Turning off:
Set the switch to "OFF" in order to turn the device off entirely.
Technical specifications:
Cutting action:
Cut size:
Cutting capability:
Input slot width:
Input slot width for CDs/DVDs:
Input voltage:
Feed rate:
Paper basket:
Protection class (DIN 66399-2):
Security level (DIN32757):
Declaration of conformity of the safety level in accordance with DIN 66399-2
We declare that this device satisfies the requirements of protection class P-4 in accordance
with DIN 66399-2 for the shredding of documents.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS
compliance. The complete declaration of conformity can be requested by post under the below
mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment.
In this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Cross-cut
5 x 18 mm
10 sheets
220 mm
120 mm
230-240 volt AC, 50 Hz, 1.2 A
1.5 m/min.
approx. 21l capacity
P4
4
- 5 -
Advertisement
