KNOW YOUR APPLIANCE
MAIN UNIT
CONTROL PANEL
Operation
-
Plug the unit into a correct mains socket.
-
Press the "ON/OFF" button once. The unit will start to work and the power indicator
light will illuminate.
-
Press the "ON/OFF" button again. The unit will stop and the power indicator light will
go off.
Note:
1. Do not use the machine when the temperature is
2. When the unit has been turned off, please wait for at least 5 minutes before turn it on
again. Fails to do this will damage the compressor.
3. This unit is fitted with an auto defrosting function. It will start when the evaporator
generates frost. This function will start to running when the temperature goes down to 5
℃.
(1) ON/OFF button
(2) Full water indicator
over 35℃ or below 5℃.
4