Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4",
2", 2-1/8", 2-1/4", 2-1/2" Hole Saws
Spare Pilot Drill
Large Mandrel
Small Mandrel with Medium Adapter
Blow Molded Case
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
®
. All rights reserved.
14 PC. BI-METAL
HOLE SAW SET
ITEM 68113 68990
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Related Manuals for WARRIOR 68113
Summary of Contents for WARRIOR 68113
- Page 1 Spare Pilot Drill Large Mandrel Small Mandrel with Medium Adapter Blow Molded Case ITEM 68113 68990 Visit our website at: http://www.harborfreight.com Email our technical support at: tech@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
-
Page 2: Save These Instructions
(such as 1-3/8″ and 1-1/2″ sizes.) Carefully thread the Adapter into the Hole Saw and then thread the Small Mandrel through the bottom so that it screws into the Adapter. Page 2 For technical questions, please call 1-800-444-3353. Items 68113/68990... - Page 3 Tighten the knurled Locking Collar to extend the Locking Pins through the holes in the Hole Saw. Tighten the knurled Locking Collar securely to hold the Hole Saw in place. Items 68113/68990 For technical questions, please call 1-800-444-3353. Page 3...
- Page 4 Operation Holding the drill at 90° to the workpiece, When finished, remove set the Hole Saw on the workpiece. Hole Saw from drill’s chuck. Press the drill’s trigger to turn it on. Remove Hole Saw from Mandrel and clean off Hole Saw with a cloth. If the drill is a variable speed type, Place Hole Saw and Mandrel cut the workpiece slowly until a circle...