Deleting A Raid Set - ECS Q87H3-M6 User Manual

Main Advanced Power Authentication
Hard Disk Drive Priorities
1st Boot
Boot Configuration
This item.
Version 2.15.1236. Copyright (C) 2002-2013 American Megatrends, Inc.

Deleting a RAID set

1. In the main Intel
RAID Volume using the up/down arrow key then press <Enter>.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
2. Use the space bar to select the RAID set you want to delete.
Press the <Del> key to delete the set.
3. A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Intel(R) Matrix Storage Manager option ROM 11.0.0.1204
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
Name
Volume0
[ ]Select
Pressing <Y> deletes all the data in the HDDs.
BIOS Setup Utility
Security
Intel volume0
® Matrix Storage Manager RAID BIOS menu, highlight Delete
[ Main Menu
[ CREATE VOLUME MENU
Level Drives
RAID0(Stripe) 2
[ DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete "Volume0"? (Y/N):
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
[ESC]-Previous Menu
Q87H3-M6 USER MANUAL
Boot Options Exit
Sets the system boot order
:Move
Enter : Select
+/-/Spacebar : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Exit
ESC: Discard changes and Exit
Setup
]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
]
Capacity Status Bootable
931.5GB Normal Yes
]
[DEL]-Delete Volume
51