Nacecare RSV 100 Operator Instructions

NACECARE SOLUTIONS
RSV 100 Backpack Vacuum with
Hypercone
TM
NOTE: As with all electrical equipment, care and attention must be exercised at all times
during its use, in addition to ensuring that routine and preventative maintenance is carried out
periodically in order to ensure its safe operation. In particular the electrical supply cable and
flexible hose should be regularly inspected by a competent person and immediate action taken to
rectify any faults found. Failure to carry out maintenance as necessary, including replacement of
parts to the correct standard, could render the equipment unsafe and the manufacturer can accept
no responsibility in this respect. See the enclosed exploded drawings for correct replacement
parts.
_____________________________________________________

MACHINE COMPONENTS

Recovery Dome

The opaque vacuum dome, which has a built-in fitting to accept the hose, is held in place by 2
toggle latches. To remove the dome lift up on the latches. The dome can be fitted in any
position desired to accommodate left or right-handed operators.

Standard Dry Filter

The RSV 100 equipped with a synthetic nylon main filter. The machine can be used with this
filter alone - however better performance is achieved if disposable paper bags are used as well.
The main filter should be removed and emptied on a daily basis. When this is done, the main
bowl filter at the bottom of the canister is exposed. This filter should also be checked on a daily
basis.
If the main filter becomes loaded with dirt & debris during use, it should be removed
periodically and brushed to remove the gross soil. Both filters can be washed in mild detergent
& hung to dry if desired.