Pc Viewer - Sd Card Format And Restore - Urive Albatross User Manual

19

PC Viewer - SD Card Format and Restore

1.# Take Micro SD card out of the black box and connect it computer.
2.# If you select
shown in the picture of (1).
3.# Format Drive : Confirms the location of a drive Micro SD card is loaded.
4.# Information window asking for confirmation or cancellation of format will be popped up when format start button is
pressed.
5.# If you press confirm button, SD format window will be seen. Information on the volume of Micro SD card, type of
file system, current allocation unit and allocation unit after format will also be seen and the name of SD card will be
automatically assigned as "AlbaMini". Format will be started upon pressing start button. "quick format" is also supported.
It may take a long time for SD card to be formatted depending on the specification of PC in " normal format".
6.# Window indicating the completion will be seen when format is completed. Press confirm button and close button to
end the procedures for formatting Micro SD card
46 _
button in main screen of viewer, SD format tab where Micro SD card can be formatted will appear as
<CAUTION>
- Allocation after format: When a normal format is done on your PC, select 32KB.
- For using the 64GB SD card, Format it on the PC viewer and the main body for its stable
use only.