Features And Connectors - Urive Albatross User Manual

07

Features and Connectors

Features
Operation
ACC ON
(Driving Mode)
Updating
ACC OFF
(Parking Mode)
Power Cable
Disconnected /
Power Switch Off
State
Driving mode starts after
booting
Update starts via MicroSD
memory card
A 20-second long video, taken
10 seconds before an accident
to 10 seconds after it, will be
recorded when a motion or a
shock is detected by the front or
(and) rear camera(s)
The last video will be recorded
using the backup battery before
the power is turned off.
Voice notification
- Blue LED turns on while booting and
blinks after booting.
"Start recording"
- Green LED of main body turns on.
- Blue LED of rear camera turn off.
- Blue LED of main body blinks while
"Start updating" updating
"Ring (finished)" - Blue LED turns off after updating
- Blue LED turns on after rebooting
- Blue LED blinks every one second in
parking mode
"Converting to - Blue LED blinks four times a second
parking mode" while saving video after detecting motion
- Blue LED blinks six times a second
while saving video upon impact
"Ring"
LED Indication
-
User's Manual _ 13