Table of Contents
Advertisement
16
[Screen setting]
1.#
When the screen setting tab is selected, users can determine whether to use the PIP function, the screen saver and the
rear video shift function.
2.#
PIP Mode : Functions to check live videos of the front and rear view in a LCD
screen simultaneously. The use of this mode can be set.
3.#
Screen Saver : Functions to turn the current screen to a basic screen displaying
only information of a current time, GPS reception status, mute status, event
storage status, etc. after the set time has passed without any input or touch
action. As soon as you touch the basic screen that screensaver is on, the basic
screen turns back to the previous video screen displaying video image of the
front or rear view. In the Screen saver status, if there is touch signal during 2
minutes, the LCD is turned off automatically. When the device's LCD is turned
off, the main device switch to screen saver mode by detecting any touch signal.
4.#
Rear video shift: This function is for shifting the rear side video stored in the
black box, between the left and right sides on the screen. Can be set to enabled
or disabled.
5.#
After completing selections of modes, press save button to save the selected settings.
40 _
<Caution!>
When the rear video shift function is set, the recorded rear video can be shifted, while the
rear video shown on the LCD screen will not be shifted.
Hide quick links:
Advertisement
Table of Contents
