Advertisement
DFMM1211 Desk Fan User Guide
IMPORTANT SAFETY INSTRUCTIONS
This appliance is not intended for use by persons
!
(including children) with reduced physical,
!
Read these instructions.
sensory or mental capabilities, or lack of
!
Keep these instructions.
experience and knowledge, unless they have
Follow all instructions.
!
been given supervision or instruction
Unplug the fan when not in use, before moving it
!
concerning use of this appliance by a person
between locations, and before cleaning,
responsible for their safety.
Refer all servicing to qualified service personnel.
!
Children should be supervised to ensure that
!
Do not expose this apparatus to rain or
!
they do not play with the appliance
moisture, e.g. by operating it in a window or
This product is intended solely for household use
!
verandah, etc.
The means of disconnecting this appliance from
!
!
Do not immerse the power cord or plug in water.
the mains supply is the mains plug. This should
Do not spray liquids into or near the fan
!
be unobstructed and readily operable at all
Do not operate this unit in the presence of
!
times .
explosive and/or flammable fumes.
ELECTRICAL INFORMATION
Do not place the fan on or near an open flame,
!
Before using this appliance ensure that the voltage
cooking or heating appliance.
of your electricity supply is the same as that indicated
Avoid contact with moving parts.
!
on the appliance.
Protect the power cord from being walked on or
!
pinched.
SPECIFICATIONS
The power cord must not overhang the edge of
!
Mains Voltage:
a desk or other surface.
Mains Power:
!
Do not operate the fan with a damaged cord or
Net weight:
plug, after a malfunction or if dropped or
Class I construction. This product must be connected to
damaged in any way.
earth.
To disconnect grip the plug and pull from wall
!
outlet. Never yank on the power cord.
UK: Waste electrical products should not be
If the supply cord is damaged, it must be replaced
!
disposed of with household waste.
by the manufacturer, its service agent or similarly
disposal facilities exist, for your nearest
qualified persons in order to avoid hazard.
facilities. See www.recycle-more.co.uk or in-
The use of attachments not recommended by
!
stor
e for details.
the manufacturer may be hazardous.
ROI: Produced after 13th August 2005.
Warning: Do NOT use this fan with any solid
!
Waste electrical products should not be
state voltage regulator or speed control.
disposed of with household waste. Please
Always use on a dry, level and stable surface
!
recycle where facilities exist. Check with your
when operating to avoid overturning.
Local Authority or retailer for recycling advice
Do not hang or mount the fan on a wall or
!
ceiling.
Never use the fan without the guards correctly
!
fitted.
Do not insert any object into the fan guards
!
whether the fan is running or not.
!
Close supervision is necessary when any
appliance is used by or near children.
INTRODUCTION
Before using this appliance please read all these
notes and instructions carefully and famliarise
yourself with the features of your new fan. In
particular, please study the assembly
instructions before commencing assembly.
UNPACKING AND ASSEMBLY
Unpack all the items carefully and remove all
plastic wrappings from the component parts.
Check the fan and components. If any items are
damaged or missing, please return the
appliance for replacement to the store you
purchased it from, or to your nearest Tesco
store. Remember to take your receipt.
Retain the packing, or if you decide to dispose of
it, make sure that you do so with due regard to
any recycling provisions currently in force.
Assemble the fan on a sturdy workbench. You
will need a No 1 and No 2 Posidriv screwdriver.
220V-240V AC, 50 Hz
45 Watts
Assemble the base and fan head separately
before joining the two parts togther.
3.0 kg
ATTACHING THE COLUMN AND BASE
Remove the screw from the base of the column
!
Separate
Place the column in the base
!
Hold the base and the column. Invert the assembly. Firmly
!
attach the screw to the column to secure the assembly
c
Insert the Column
Page 2
DFMM1211 Desk Fan User Guide
ASSEMBLING THE FAN HEAD
Rear
Guard
A:
Unscrew the guard nut from the motor head by
Handle
Front
rotating it anticlockwise.
Speed
Guard
Switch
Oscillator
Button
Fan
Blade
Securing
Clip
Guard
Attaching
Screw
Screw
Column
C:
Base
Unscrew the fan screw so that it is clear of the mounting bush.
Place the fan blade on the spindle and push the blade in as far
as it will go. Now tighten the screw tightly to lock the fan blade
to the spindle.
b
Pull the fan blade slightly to check it is firmly attached.
Remove the Column Screw
D:
Attached to one of the guards
there is a small screw and nut.
Remove these and keep them safe.
Open the side clips of the front guard
fully.
Hook the top clip of the front guard
over the rear guard and pull down to
d
attach it.
Screw the base to the column
Manoeuvre the front guard so that the
screw holes in both guards line up.
Loosely attach the screw and nut.
Line up the two guards and then shut
the clips to secure the two guards.
Now tighten the screw tightly.
This completes the fan head assembly
Page 3
DFMM1211 Desk Fan User Guide
B:
Fit the Rear Guard on the motor housing. Place the flat in the
guard over the motor. The handle should be at the top. Replace the
guard nut and hand tighten it firmly.
Fit the fan blade as shown.
TOP CLIP
Screw
Page 4
Advertisement
