Advertisement
2. Using the phone
Making a call
Enter the phone number and press
/FLASH or
phone number.
Speed dialing
In idle mode, press and hold a key from
is displayed and dialed.
Answering a call
Press
/FLASH or
/SPEAKER to answer the incoming call.
Ending a call
During a call, press
/BACK or put the handset on the base.
Adjusting volume
During a call, press VOL+ or REDIAL/VOL- to adjust the volume.
Muting a call
• During a call, press MUTE to mute the microphone, so that you can talk
to someone else in the room without your caller hearing you.
• Press MUTE again to unmute.
Dialing from the redial list
• Press REDIAL/VOL- and then VOL+ or REDIAL/VOL- to scroll and
select the entry you want to redial.
• Press
/FLASH or
/SPEAKER to dial the number.
Dialing from the calls list
• Press CID and then VOL+ or REDIAL/VOL- to scroll and select the entry
you want to dial.
• Press
/FLASH or
/SPEAKER to dial the number.
Adding an entry to the phonebook
• Press
. Press MENU then VOL+ or REDIAL/VOL- to scroll and
select ADD.
• Press MENU and enter the name.
• Press MENU and enter the number.
• Press MENU to save.
Dialing from the phonebook
• Press
and then VOL+ or REDIAL/VOL- to scroll and select the entry
you want to dial.
• Press
/FLASH or
/SPEAKER to dial the number.
/SPEAKER to dial the
/1 to WXYZ/9 until the number
Paging/Finding the handset
• Press FIND on the base. All handsets registered to the base will ring.
• To stop the paging, press FIND again, or press any key on the handset,
or place the handset on the base.
Using your answering machine
Press
from idle mode. New messages will be played followed by any
older messages.
During the message playback, press the keys below to perform the following
functions:
Repeats the current message. Press twice to playback the
previous message.
Stop the message playback.
Skip to play the next message.
VOL+
Increase the volume
VOL-
Decrease the volume.
MUTE
Delete the current message and the next message will be
played.
Toggle the message playback via earpiece/speakerphone.
/
SPEAKER
Exit to idle.
/
BACK
NOTE
When you are on a call, the answering system will not answer the second
incoming call.
Advertisement
