Setting And Removing Protection For All Frames; Smartmedia Tm Write-Protection - FujiFilm MX-1200 Owner's Manual

SETTING AND REMOVING PROTECTION FOR ALL FRAMES

1
When you set the Mode dial to " ", the menu
appears on the LCD monitor.
!
The protection cannot be cancelled for files specified
in the DPOF settings. Cancel the DPOF setting first.
62
( P.56)
2
Select "PROTECT ALL" or "UNPROTECT
ALL".
Press "MENU/EXE".
3
A confirmation screen will appear to proceed,
press the "MENU/EXE" button.
!
Formatting erases all images, including protected
images. ( P.58)
SmartMedia TM Write-Protection
Attaching a write-protect sticker to a SmartMedia
ensures that you do not accidentally record or
erase images or format the SmartMedia. Peeling
off the sticker allows you to use the card
normally again.
Ensure the write-protect sticker is attached within
the designated area .
Be cautions not to get injured from the edge of the
write-protect sticker.
The SmartMedia may not be write-protected if the
write-protect sticker is not clean.
See P.72 for more information on SmartMedia.
5
63