Using The Digital Telephoto; Manual Mode - FujiFilm MX-1200 Owner's Manual

USING THE DIGITAL TELEPHOTO

Pressing " " on the 4-way button during
photography (in any photography mode) allows
you to zoom in on your subject, roughly doubling
(2 ) the size of the central part of the image.
The zoom scale is shown on the LCD monitor.
Pressing " " restores the normal image.
!
This function does not operate with the LCD monitor
switched off.
36
!
Use the LCD monitor to take pictures.
If the digital telephoto is used when FILE SIZE
(number of pixels) is set to [1280 960], the
image is recorded at 640 480 pixels.
( P.43)
If FILE SIZE (number of pixels) is set to
[640 480], the number of pixels recorded
(the image size) does not change when the
digital zoom is used.

MANUAL MODE

1
Set the Mode dial to " ". The settings menu
is displayed.
!
When you want to view the image on the LCD
monitor, press the "DISP" button.
2
Use " " and " " on the 4-direction cursor to
move around the menu and " " and "
select a setting.
See P.32-34 for more information on the
flash modes.
Factory Default Settings
Menu Setting
Forced Flash AUTO
White Balance AUTO
0
Brightness (EV)
The above settings are the same as those used in Auto mode.
" to
3
37