Advertisement
Getting Started
This chapter describes how to set up and start the Retail Tablet.
Setting Up the Retail Tablet
To set up the Retail Tablet:
Remove the transparent cover sheet protecting the tablet's screen.
1.
Use the fleece side of the provided cleaning cloth to clean off any dust on the
2.
touch screen.
Peel off the backing of the anti-glare sticker and place it gently and carefully on
3.
the touch screen. You can use the white foam provided in the packaging to press
on the sticker as you apply it in order to ensure there are no air bubbles between
the sticker and the screen.
Mount or position the tablet on the table, counter, shelf or floor according to the
4.
provided accessories. You may refer to the Accessories section (page 20) for a
description of mounting accessories and other devices that can be connected to
the Retail Tablet
Turning On the Retail Tablet
Before using the Retail Tablet when powered by battery (without the power
supply), we recommend charging it for 5 to 6 hours.
The Retail Tablet is preconfigured to automatically start its Autoplay application
when it is turned on. You may refer to the Logging Out of the Retail Tablet
Autoplay Application section on page 10 for instructions on logging out of the
i DISPLAY Autoplay application in order to access a standard Android OS screen
To turn on the Retail Tablet:
1.
Move the Standby button on the back of the tablet to determine the tablet's
power saving behavior. You may refer to the Standby Mode and ON Mode section
on page 12 for more information.
2.
Connect one side of the power supply to the tablet's DC In socket located on its
back lower side.
3.
Plug the power supply into a standard electrical outlet. If this is the first time the
tablet is turned on, then wait two minutes after plugging in the power supply
4.
before pressing the On/Off button to turn on the tablet.
Press the On/Off button on the back of the tablet for approximately seven
seconds.
Getting Started
9
Hide quick links:
Advertisement
