Advertisement
Getting Started
This chapter describes how to set up and start the Retail Tablet.
Setting Up the Retail Tablet
To set up the Retail Tablet:
1.
Remove the transparent cover sheet protecting the tablet's screen.
2.
Use the fleece side of the provided cleaning cloth to clean off any dust on the
touch screen.
3.
Mount or position the tablet on the table, counter, shelf or floor according to
the provided accessories. You may refer to the Retail Tablet Accessories section
(page 20) for a description of mounting accessories and other devices that can be
connected to the Retail Tablet
Turning On the Retail Tablet
The Retail Tablet is preconfigured to automatically start its Autoplay application
when it is turned on. You may refer to the Logging Out of the Retail Tablet
Autoplay Application section on page 11 for instructions on logging out of the
i DISPLAY Autoplay application in order to access a standard Android OS screen
To turn on the Retail Tablet:
1.
Connect one side of the power supply to the tablet's DC In socket located on its
back lower side.
2.
Plug the power supply into a standard electrical outlet. If this is the first time the
tablet is turned on, then wait two minutes after plugging in the power supply
before pressing the On/Off button to turn on the tablet.
3.
Slide the On/Off button on the back of the tablet.
NOTE
Each time the tablet is powered on (after being off), it may take up to two
minutes to begin to play.
4.
The tablet is provided with a preloaded demonstration application that it
automatically starts to play.
10
Getting Started
Advertisement
