i Display Retail Tablet M User Manual page 16

For example, if a folder contains an image file and two video files in the following
order:
•
car-choice-banner.jpg
•
car-choice-banner.mpeg
•
top-of-range.mpeg
then the tablet will first display the car-choice-banner.jpg image for three seconds,
and then play the discount-car.mpeg video and then play the top-of-range.mpeg
video.
If the tablet is in ON mode, it will then repeatedly play this sequence in a loop. If
the tablet is in Standby mode, it will then go to standby (black screen).
Connect Box – Selecting Folders 1 – 12
The Retail Tablet can also play the content of folders named from 1 to 12 if a
Connect Box is connected to it. This Connect Box has 12 connectors for push
buttons or touch sensors and 1 connector for motion sensor.
The Retail Tablet plays the content of Folder 0 by default. If one of the Connect Box
buttons is pressed, then the Retail Tablet plays the same numbered folder once.
After it finishes:
In Standby mode, the Retail Tablet then goes to standby (black screen) and will
•
play Folder 0 again after the START indicator is tapped.
– OR
In ON mode, the content of Folder 0 will then play repeatedly.
•
For example:
• In Standby mode, if button number 6 is pressed on the Connect Box, then the
content of Folder 6 is played once and then the Retail Tablet goes to standby.
•
In ON mode, if button number 1 is pressed on the Connect Box, then the content
of Folder 1 is played once and then the content of Folder 0 is played repeatedly.
Motion Sensor
The Retail Tablet can also have an additional connector for a motion sensor. The
motion sensor enables the Retail Tablet to play the content of a folder named MS,
as follows:
Standby Mode
This option enables you to set up the Retail Tablet so that it is typically in Standby
mode in order to save power. When the sensor detects motion the Retail Tablet
automatically starts playing the contents of the MS folder.
The content in the MS folder is played repeatedly as long as motion is detected.
When motion is no longer detected, the tablet goes back to standby.
ON Mode
This option enables you to set up the Retail Tablet so that by default it plays
the contents of Folder 0 until the sensor detects motion. Then the Retail Tablet
automatically starts playing the content of the MS folder.
16
–
Playing Content