Table of Contents
Advertisement
5. OSD Menu
To operate the OSD menu, you can use the joystick on the rear panel of the
camera cable (as shown in chapter 4). To go into the OSD menu, press the
'Enter/Confirm' button on the joystick.
In the OSD, you can configure the following;
1. Exposure
3. Day & Night
5. 3D DNR
7. Monitor
5.1 Exposure
Exposure setup includes: Lens, Brightness, Shutter, AGC and Sense-up.
Lens: Select the lens type. The camera supports, manual IRIS, DC Lens and
Video Drive lens. Please setup according to the use of lens. The default setting is
'MANUAL'.
Brightness: Push left/right to setup the value of brightness (0-20).
Shutter: Use the arrow buttons to adjust the shutter speed. Options include
1/25~1/60000, FLK and Auto. Please note that and other option than Auto or 1/25
will disable the DSS function.
AGC: When there is insufficient light, push left/right to setup its level. Adjust the
level from 0~10.
Sense-up: Extends the exposure time of camera. The higher the time, the lower
the frame will be. However the shadow created will be longer in dark conditions.
Please select OFF or Auto.
2. White Balance
4. Back Light
6. Image
8. System
7
Advertisement
Table of Contents
