Kenmore 148.03447410 Use & Care Manual page 26

For each door, insert bottom hole onto bottom panel hinge pin. Push hinge pin in top corner of control
panel so that it inserts into top hole in the door.Adjust door magnet on the bottom panel to align the
magnet with doors, and then tighten magnet screws.
Left Door Right Door
Door Magnet
Install the Heat Diffusers, Cooking Grates, Side Burner Grate and Warming Rack
Position the heat diffusers, cooking grates, side burner grate and warming rack as shown. NOTE: The
diffuser edges fit into slots at front and back of burner box. Fit the back of the warming rack into the
clip on the back wall of the burner box. Remove battery cap and insert AA battery with positive pole
facing out. Replace cap.
Heat Diffuser
Cooking Grate
Warming Rack
Burner Grate
InsertAA battery
26