Advertisement
Technical specifications Pro-Ject Tube Box DS
A
Typical for low output MC cartridges,
* Input capacitance is irrelevant for low-output MC cartridges
Input impedance, variable:
Input capacitance, variable:
Input gain:
Noise floor:
THD:
De-emphasis curves accuracy:
Subsonic filter:
Input:
Line-level output:
Outboard power supply:
Power consumption:
Dimensions W x H x D (D with sockets): 103 x 72 x 144 (156)mm
Weight:
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
©
Copyright
2012. All rights reserved.
B
typical for MM or high output MC cartridges
stepless 10ohms - 1.000ohms
47pF, 147pF, 267pF and 367pF/47kohms
B
40dB and 50dB
60dB
A
82dB (93dB – IEC -A)
<0.1%
20Hz - 20kHz / max. 0,5dB
at 20Hz with 18dB/octave
1 pair RCA/phono sockets
1 pair RCA/phono sockets
18V/1.000mA DC, suitable for your country's mains supply
490mA DC
1.100g without power supply
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
© Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2012.7.11
A
*
B
5
Advertisement
