Pro-Ject Audio Systems Tube Box DS Instructions For Use

Pro-ject tube box ds

Hide thumbs Also See for Tube Box DS:

Download this manual

INSTRUCTIONS FOR USE

Pro-Ject Tube Box DS

Table of Contents

Page 1 INSTRUCTIONS FOR USE Pro-Ject Tube Box DS...
Page 2: Subsonic Filter
Ortofon X1-MC (high-output MC) - input gain 50dB, input capacitance 367pF, input impedance 47kohms Ortofon Rondo Red (low-output MC) - input gain 60dB, input capacitance *, input impedance 10ohms Input gain 60dB 50dB 40dB © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2012.7.1...
Page 3: Input Impedance, Variable - Low-Output Mc Cartridges
The literature for cartridges should also specify the correct input impedance (low-output MC cartridges) and the correct input capacitance (high-output MC and MM cartridges), into which the cartridge is designed to work. If in doubt please consult your dealer. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2012.7.11...
Page 4: Connection To The Amplifier
No earth connection from cartridge or arm, or arm cable to phono amplifier, or earth loop. Output too quiet or too loud, or distorted: Input gain incorrectly set - input overloading or insufficiently amplified. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2012.7.1...
Page 5: Warranty
This guide was produced by: Audio Trade GmbH changes to the technical specification without prior © Copyright 2012. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2012.7.11...