Samsung AQ12?5(6)MB Service Manual page 22

Disassembly and Reassembly
No Parts
2 Fan and Motor
3 Heat Exchanger
4
Compressor
Samsung Electronics
Procedure
1) Do "1" above.
2) Remove the nut flange (Turn to the right to
remove, as it is a left hand screw)
3) Separate the fan.
4) Loosen Four fixing screws to separate the
motor.
5) Loosen two fixing screws and seperate the
motor bracket from the base.
1) Do "1","2" above.
2) Loosen two fixing screws of left and right
side.
3) Disassemble the inlet and outlet pipe by
welding.
4) Separate the heat exchanger.
1) Do "1", "2", "3" above.
2) Open the terminal cover of compressor and
unscrew the connection terminal.
3) Disassemble the inlet and outlet pipe of
compressor by welding.
4) Loosen the three bolts of the lower part.
5) Separate the compressor.
Remark
4-9