Operating The System - Mw Band; Presetting Stations - Sangean DMS-16 User Manual

Operating the system – MW band
Connect the external AM loop antenna to the antenna socket.
1. Press the Standby button to switch on the radio.
2. Press the band button to select MW band.
3. Press and release Tuning Control +/- button to tune to required
stations. Long press Tuning Control +/- button for more than
0.7 seconds, radio frequency will automatically increase/decrease
until next station of sufficient strength has been found.
4. Rotate the external AM loop antenna for best reception.
5. Adjust the volume control for comfort listening.

Presetting stations

There are 10 memory presets each waveband for this receiver.
27
20060919_DMS-16_381P501-A_GB.p65
2006/9/19, ¤W¤È 09:15
GB
24