Drc Value Control - Sangean DMS-16 User Manual

DRC Value Control

1. In DRC value mode, the user will be presented with a menu.
The top line will contain the currently selected DRC value.
The bottom line will contain the first value in the list,
with scrolling indicators.
2. Press OK then Tuning +/- buttons to scroll through the option
DRC 0 DRC 1/2 DRC 1
3. Press OK to confirm the selection.
Note:
DRC (Dynamic Range Control) can make quieter sounds
easier to hear when your radio is used in a noisy
environment.
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
19
22
20060919_DMS-16_381P501-A_GB.p65
DRC 0 .......
2006/9/19, ¤W¤È 09:15