Auto Tuning; Secondary Services - Sangean DMS-16 User Manual

Auto tuning

As time passes, new station may become available.
To find new stations, proceed as follows:
a. Press and release Auto Tune button, display will show
"Scanning". Your radio will perform a scan of the DAB channels.
As new stations are found, the station counter on the right-hand
side of the display will increase and stations will be added to
the list.
b. To carry out a full scan of the entire DAB band, press and hold
down the Auto Tune button for more than 2 seconds until display
shows "Scanning". As new stations are found, the station
counter on the right-hand side of the display will increase
and stations will be added to the list.

Secondary services

Certain radio stations have one or more secondary services
associated with them. If a station has a secondary services
associated with it, the display will show "
name on the station list. The secondary service will then appear
immediately after the primary service as press and release
Tuning +/-.
17
20060919_DMS-16_381P501-A_GB.p65
" next to the station
2006/9/19, ¤W¤È 09:15
GB
14