Filling Door; Primary Air Control; Secondary Air Control; Ash Door - Baxi Solo Innova Instructions Manual

1.1.1 Control panel (standard)
Fig. 1.1.1
(A) Space for weather compensation system
(C) Thermometer
(D) Fuse
(E) Switch for circulation pump
(F) Switch for fan
1.1.2

Filling door

1.1.3

Primary air control

1.1.4

Secondary air control

1.1.5

Ash door

1.1.6 Sight glass
1.1.7

Exhaust stack

1.1.8 Induced-draft fan
1.1.9

Cleaning damper

1.1.10

Type plate

1.1.11

Cooling spiral

1.1.12
Flue gas turbulators
1.1.13

Heat exchanger pipe

1.1.14

Filling chamber

1.1.15

Fuel tunnel

Description of more important components (layout see Fig. l.l).
INSTRUCTIONS
The boiler temperature is adjusted from here.
See also Section 1.4.
A D C
The big filling door makes adding fuel easy.
The primary air of combustion is set here.
The secondary air of combustion is set here.
Combustion takes place behind this door and ashes are removed through it.
Combustion can be monitored through the sight glass.
An exhaust pipe is ducted to the chimney.
Ensures the required air supply for combustion.
Detachable cleaning damper for cleaning the heat exchanger pipe.
Indicates factory no. and type and other information required to order spare parts.
Factory no. and type can be noted in Section 5 on the last page of this user guide.
Thermal protection.
Ensure the correct flue gas temperature.
The heat is transferred to the boiler water here.
For the firewood.
Air of combustion is added to the flue gases and they are burned here, ensuring high
efficiency.
Solo Innova
Page 5
E F N H
(H) Overheating thermostat – Restarting knob
(I) Thermostat
(N) Reset switch
(O) Switch to open door
(P) Minimum thermostat
O I P
210680.11