Description Of The Apparatus - Baxi Solo Innova Instructions Manual

1.4

Description of the apparatus

1.4.1
Control panel – the boiler temperature is set from here.
Fig. 1.4.1
(A) Space for weather compensation system
(C) Thermometer
(D) Fuse
(E) Switch for circulation pump
(F) Fan switch
(A) Space for weather compensation system.
(C) Thermometer. Shows the boiler temperature. The boiler temperature is adjusted via thermostat (I).
(D) Fuse max. 6.3 A (5 x 20 mm).
(E) Switch for circulation pump.
(F) Fan switch (should always be set at I).
(H) Overheating thermostat – switches off the fan when the boiler temperature is approx. 100°C. Wait until the
boiler temperature has fallen to 75°C. To switch on again, unscrew the protective cap and push in the ejected
pin.
(I) Thermostat 85-93°C. Recommended set temperature 85-90°C.
To ensure that the temperature is not set at less that 80°C, a stop screw is mounted under the knob.
(N) Reset switch. The fan switches off automatically if the boiler has burned out and the boiler/flue gas
temperature falls.
– In units with buffer tank, the fan switches off when the temperature at the sensor in the flue gas has reached
90°C.
– If the temperature at the sensor falls below 90°C, the reset switch (N) must be pressed to restart combustion
in the boiler.
(O) Door open switch – ensures that children cannot open the door.
Activating the switch releases an interlock in the upper cover door.
(P) The minimum thermostat switches off the fan and the pump when the wood has burned out.
INSTRUCTIONS
A D C E
Solo Innova
Page 10
F N H O
(H) Overheating thermostat – restarting button
(I) Thermostat
(N) Reset switch
(O) Door open switch
(P) Minimum thermostat
I P
210680.11