Universal Repeater Setup - AXIMCom MR-102N User Manual

6.4

UNIVERSAL REPEATER SETUP

The Universal Repeater function is similar with WDS in that it is used to essentially enlarge the area of wireless
network coverage. However, unlike WDS, Universal Repeater offers simplicity in configuration requirements, as
users only need to configure the current AP as a client, and to connect it to the second AP's SSID (or BSSID).
However, you need to ensure that the two APs are using the same wireless channel and security mode (and key)
for Universal Repeater to work effectively.
1. Click on [Wireless] – [Universal Repeater] tab. You will see the following screen.
2. Configure universal repeater settings following the instructions below.
Universal Repeater
Target SSID
Target BSSID (MAC)
Wireless Channel
Site Survey
Security Mode
Select Enable to enable Universal Repeater function.
Select Disable to disable Universal Repeater function.
Enter the target SSID to connect to.
Enter the target BSSID to connect to. The BSSID is optional if you setup
the target SSID.
Select which channel to be located to.
Click the Tab to use site survey choosing the Target SSID
Choose the security mode the target AP uses, and enter the key if
needed.
46