Subscribe to Our Youtube Channel
Related Manuals for Dante DLB5208
Summary of Contents for Dante DLB5208
- Page 1 DLB5208-DLB5216 8-16 Chan Standalone DVR Installation and Operations Manual Model Number: DLB5200 Description: Standalone Linux DVR 8 and 16 Channels...
- Page 2 DESCRIPTION The DLB5208-DLB5216 Series are standalone, 8 and 16 channels standalone Digital Video Recorder/Servers that utilize an embedded processor, LINUX based real time operating system (RTOS) for the highest reliability of operation. Units are available with H.264 video compression outstanding...
- Page 3 Network Digital Video Recorder Operation Manual ( V3.0 ) CAUTION Place the DVR in ventilation space. The DVR should be worked in right temperature and humidity. Keep the DVR surfaces and the circuit board clean and dry. To clean the outside case of the DVR, use lightly dampened cloth with water (no solvents).
-
Page 4: Table Of Contents
Network Digital Video Recorder Operation Manual ( V3.0 ) Table of contents Chapter I Product Introduction 1.1 Summary 1.2 Functions and features Chapter II Installation Instructions 2.1 Installation Instructions 2.2 Installation environment 2.3 Rear panel connection 2.4 Rear panel connection Chapter III Description for Operations 3.1 Panel operation 3.2 Remote control operation... - Page 5 Network Digital Video Recorder Operation Manual ( V3.0 ) 3.3 Mouse operation Chapter IV Menu Setup 4.1 Summary 4.2 System setup 4.3 Camera setup 4.4 Record setup 4.5 Schedule setup 4.6 Motion alarm 4.7 PTZ setup 4.8 Network setup 4.9 Alarm setup 4.10 Disk management 4.11 LOG list view Chapter V Basic Operations...
- Page 6 Network Digital Video Recorder Operation Manual ( V3.0 ) 5.1 Turn on DVR 5.2 Software update 5.3 PTZ control 5.4 Motion detection 5.5 Video recording preparation 5.6 Search and playback 5.7 Backup 5.8 SPOT output operation 5.9 Audio 5.10 Image quality selection and recordable time of hard disk 5.11 Use of PC Client software Appendix 1 Technical parameters Appendix 2 Trouble shooting...
-
Page 7: Chapter I Product Introduction
Network Digital Video Recorder Operation Manual ( V3.0 ) Chapter I Product Introduction Summary This equipment is an embedded digital hard disk video recorder specially designed for security & protection. It adopts the embedded processor and embedded operating system and integrates with each latest technologies in IT field, such as video frequency /audio frequency compression/ decompression, large capacity hard disk storage, TCP/ IP network remote control etc., investing the system with high intellectualization and stability. - Page 8 Network Digital Video Recorder Operation Manual ( V3.0 ) Flexible Display mode: Full screen; Quad. Four channels playback simultaneously. Low stream, long recording time. Support mouse and remote control operation. Support PTZ control. Support VGA output. Support pre-record. Support CD/DVD-RW. Support OSD languages of multiple countries.
-
Page 9: Chapter Ii Installation Instructions
Network Digital Video Recorder Operation Manual ( V3.0 ) Chapter II Installation Instructions Installation Instructions In order to ensure your rights and interests, please read this manual carefully before you install and use this product . This is an indoor equipment. For the prevention of short circuit or electric shock, please do not expose this product to rain or use in wet &... -
Page 10: Rear Panel Connection
Network Digital Video Recorder Operation Manual ( V3.0 ) Rear panel connection Figure A. Rear panel connection of 8-CH Real time H.264 DVR: Network Camera 8 Camera 1 Network user POWER Audio input USB port Spot Output Audio output Video Output VGA Output Alarm... - Page 11 Network Digital Video Recorder Operation Manual ( V3.0 ) Figure B. Rear panel connection of 16-CH Real time H.264 DVR: Network Camera 1 Camera 16 Network user POWER Audio input USB port Spot Output Audio output Video Output VGA Output Alarm...
- Page 12 Network Digital Video Recorder Operation Manual ( V3.0 ) Figure C. Rear panel connection of 16-CH Non-real time H.264 DVR: Network Camera 1 Camera 16 Network user POWER Audio input USB port Video Output Audio output VGA Output...
- Page 13 Network Digital Video Recorder Operation Manual ( V3.0 ) Rear panel connection description: (1) "1-8/ 1-16": video input interfaces, connected with video output of the Video Camera. BNC interface. (2) "IN": audio input interface, supporting LINE IN audio input signals. AV interface. (3) "MON": video output interface, connected with video input interface of the monitor.
-
Page 14: Rear Panel Connection
Network Digital Video Recorder Operation Manual ( V3.0 ) Rear panel connection To insert U disk into USB interface for backup and update. When backup or update, please pay attention: 1. Insert a U disk and wait for a moment (about 10 seconds). Then you can do the operation of backup. 2. -
Page 15: Chapter Iii Description For Operations
Network Digital Video Recorder Operation Manual ( V3.0 ) Chapter III Description for Operations Panel operation Front panel description of 8/16-CH H.264 DVR INFO POWER LOCK PLAY ALARM MENU AUDIO Marks Indicator/Key title Item Functions When the DVR is running, this light is red. Power indicator POWER When the Red indicator flashes, the hard drive is being read or written to. - Page 16 Network Digital Video Recorder Operation Manual ( V3.0 ) Marks Indicator/Key title Item Functions Recording indicator When the DVR is in recording mode, this light is on. Play indicator When the DVR is in playback mode, this light is on. PLAY Remote ID is set as "ON",...
- Page 17 Network Digital Video Recorder Operation Manual ( V3.0 ) Marks Indicator/Key title Item Functions Sixteen split key The monitor displays sixteen split-screen (It is void in 8-channel DVR) In search mode, press BAK key after selecting the sear ch d ata t o ba ckup Backup key them to U disk or CD/DVD-ROM.
- Page 18 Network Digital Video Recorder Operation Manual ( V3.0 ) Marks Indicator/Key title Item Functions In live mode, press " " key to ente r playbac k mode and play the last file. Play & pause key Press it again to pause. Press it for the third time to continue playing. In backup mode, press "...
- Page 19 Network Digital Video Recorder Operation Manual ( V3.0 ) Marks Indicator/Key title Item Functions Channel keys Single channel display key. ("9~16" are invalid for 8-CH DVR.) 1~16 Press it to enter menu setup mode. In lock mode, press it to prompt to input Menu key MENU the password.
-
Page 20: Remote Control Operation
Network Digital Video Recorder Operation Manual ( V3.0 ) Remote control operation Installing the remote control Open the battery cover, install two batteries (Type No.7), make sure positive and negative poles are right, then close the battery cover. Using the remote control Before using it, please confirm that batteries have been installed correctly. - Page 21 Network Digital Video Recorder Operation Manual ( V3.0 ) Function description Serial N o. Key symbol Description In normal running mode, press " " key to pop up a menu to prompt whether to turn off. The DVR will be turned off safely and enter the standby mode after "confirm " is selected. The power light on the panel will turn green from red.
-
Page 22: Mouse Operation
Network Digital Video Recorder Operation Manual ( V3.0 ) Mouse operation Note: Insert the mouse before power on. The mouse can not be pulled out in the process of op eration, or the system will automatically restart That is to say, mouse does not support hot swap. Description of icons Icons Click the left icon to pop up the right icon. - Page 23 Network Digital Video Recorder Operation Manual ( V3.0 ) Description of icons Icons in the system menu. In PTZ control mode, right-click to display icons as No. 07-15 on the bottom of the screen. Control the dome to rotate upward/ downward/ leftward/ rightward. + "...
- Page 24 Network Digital Video Recorder Operation Manual ( V3.0 ) Description of icons Icons Click this icon to view the information of the hard disk, the condition of network conne ction and the version number. In live or recording mode, click this icon to pop up " SPOT CAM01 " on the top middle of the screen. It means that SPOT output stays in camera one, click the channel number icon to switch the channel of SPOT output.
- Page 25 Network Digital Video Recorder Operation Manual ( V3.0 ) Description of icons Icons In playback mode, click this icon to playback images backward at 2 speed. Click this icon again to playback images backward at 4 speed. Click this icon for the third time to return to normal play mode.
-
Page 26: Chapter Iv Menu Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) Chapter IV Menu Setup Summary In live preview mode, select " MENU " key on the remote control or the pane l or click icon in mouse menu to enter the main menu. Select " ESC " key to return to the superior menu until it exits fro m al l men us. "u p, down, left, right, enter, +, "... -
Page 27: System Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) Note: (1) To revise video format (PAL/NTSC), modify video resolution (CIF/D1) and res tore factory setup will all restart the system automatically. (2) Please format all hard disks after any one of the following operations has been done. a. -
Page 28: Camera Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) (2) Time format: used to set the format of date display , Asia/ Europe/ America are optional. (3) Time disp pos: the display position of time and date, top middle / bottom middle/ no display are optional. (4) Border disp: to select the color of borders, gray/ black/ white / off are optional. -
Page 29: Record Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) When the cursor is on camera name, press ENTER to apply customized user name. Press ENTER again to cancel. (1) CAM: used to select the channel to be revised parameters. (2) Camera name: used to set the channel name; press " +/ - " or left-click/right-click with the mouse to modify. (3) Brightness: used to adjust brightness of the channel. -
Page 30: Schedule Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) (2) Prerecord: on/off are optional. It is pre-recording for alarm record. It w ill begin to recor d about 3 seconds ahead of move or alarm happening . (3) Overwrite: whether the recorded videos in the hard disk are rewritable. If it is ON, the previous recorded video information will be replaced in turn when the hard disc is full. - Page 31 Network Digital Video Recorder Operation Manual ( V3.0 ) (1) CAM: used to select the channel to be set. (2) All CAM: the parameters in schedule setup are effective for all channels after selecting this item. (3) Day: used to select the day of video schedule. (4) All day: the parameters in schedule setup are effective for all days after selecting this item.
-
Page 32: Motion Alarm
Network Digital Video Recorder Operation Manual ( V3.0 ) Motion alarm Note: 16-CH Non-Real Time DVR is not equipped with this function. (1) CAM: used to select the channel to be set. (2) SPSENS: used to set the speed of image display under the motion alarm mode so as to activate the alarm re cord. (3) LVSENS: eg. -
Page 33: Network Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) (1) Camera: to select the channel to be set. (2) Baudrate: to set baud rate corresponding to the current channel PTZ. (3) Device ID: to set ID address corresponding to the current channel PTZ. (4) Protocol: set communication protocol corresponding to the current channel PTZ. -
Page 34: Alarm Setup
Network Digital Video Recorder Operation Manual ( V3.0 ) (1) DHCP: Get IP address automatically. (2) IP address: You'd better set the fourth date from 010 to 099, or it will collide with the router DHCP. (3) Gateway and subnet mask: Gateway is the LAN IP address of the router. (4) DVR port: Transfer date stream, such as video and audio frequency. -
Page 35: Disk Management
Network Digital Video Recorder Operation Manual ( V3.0 ) Note: 16-CH Non-Real Time DVR is not equipped with this function. There are two ways for alarm output, Buzzer and Relay. They include three alarm modes: (1) Video loss alarm; (2) Video motion detection alarm; (3) Sensor input alarm. -
Page 36: Log List View
Network Digital Video Recorder Operation Manual ( V3.0 ) (5) Record clear: used to empty the current disk. (6) Disk format: used to format the current disk. LOG list view 4.11 This menu is used to search power on/off information of this machine. -
Page 37: Chapter V Basic Operations
Network Digital Video Recorder Operation Manual ( V3.0 ) Chapter V Basic Operations Turn on DVR Please confirm each item in Chapter 2 "Installation instructions" has been done before turning on DVR. Please check whether the system connection is correct, input / output equipments are connected well and the power supply is on before turning on DVR. -
Page 38: Ptz Control
Network Digital Video Recorder Operation Manual ( V3.0 ) In the process of update, please ensure no power breakdown and don't pull out USB disk, or update will be unsuccessful. Make sure U disk works in good condition so as to avoid abnormal performance in the process of update PTZ control In live o r video r ecording mode, press PTZ key on the panel or remote control or click the PTZ icon in mouse... -
Page 39: Motion Detection
Network Digital Video Recorder Operation Manual ( V3.0 ) When the cursor is on "PTZ: CAM01 SPEED:01 DATA:01", the corresponding item will glitter. You could select camera, set the speed and preset the data of image point. Select the item which need modify by pressing "SEQ" key on the remote control or clicking the item directly with the mouse, then change the numerical value by pressing "+/-"... - Page 40 Network Digital Video Recorder Operation Manual ( V3.0 ) Select the channel to be set, modify the speed of motion alarm, alarm sensitivity, edit the alarm area (refer to "Motion alarm setup" for details). After setup, return to the main menu. Step II Set schedule.
-
Page 41: Video Recording Preparation
Network Digital Video Recorder Operation Manual ( V3.0 ) Firstly select the channel and day to be set and set the video recording mode as "AUTO ". S econdly set the time segment of Motion detection, and set the video type as motion alarm or alarm + motion. Then return to live mode and press "... - Page 42 Network Digital Video Recorder Operation Manual ( V3.0 ) If necessary, enter the menu to set the video recording parameters including whether to overwrite, whether to record, video image quality and video frame rate. Press "+" "-" key or click the disk name to check information of other disks. "Ver: 2.012"...
- Page 43 Network Digital Video Recorder Operation Manual ( V3.0 ) on the screen (it will disappear about 5 seconds later), indicating the start of video recording. If record modes of some channels are auto, you can set the record type as " time, motion, alarm or alarm+motion". Then press "...
-
Page 44: Search And Playback
Network Digital Video Recorder Operation Manual ( V3.0 ) Search and playback Press " " key or click icon in live or record mode to play the last video file. Press " " key or click icon in live or record mode to pop up the search menu. You could s elect a video file to playback by time search. -
Page 45: Backup
Network Digital Video Recorder Operation Manual ( V3.0 ) In the option of date and start time, input the date and time you need to play or drag the arrow under the time scale with the mouse to select the start time, then move the cursor to "PLAY" and click it or press " "... - Page 46 Network Digital Video Recorder Operation Manual ( V3.0 ) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 CALCULATE BACKUP In backup menu, the first row prompt the valid time of the video recording. You could select the CD for backup in DEVICE item.
-
Page 47: Spot Output Operation
Network Digital Video Recorder Operation Manual ( V3.0 ) Video file that you want to backup. The file size should not exceed the maximum capacity of the selected device. 5. Move the cursor to "Backup" and press " " key or click "Backup", the equipment will start to backup the video file. SPOT output operation Note: 16-CH Non-Real Time DVR is not equipped with this alarm function. -
Page 48: Audio
Network Digital Video Recorder Operation Manual ( V3.0 ) Audio This DVR supports 2-line audio input and 2-line audio output, and audio input supports Line in.. For audio monitoring operation, please refer to the application of " AUDIO " key. Image quality selection and recordable time of hard disk 5.10 The image quality of video is optional: High, Medium, Low. -
Page 49: Appendix 1 Technical Parameters
Network Digital Video Recorder Operation Manual ( V3.0 ) Appendix 1 Technical parameters Real Time H.264 DVR Real Time H.264 DVR 16 Non-Real Time H.264 DVR Video input 8-CH Composite: 1.0Vp-p/75Ù, BNC 8 16-CH Composite: 1.0Vp-p/75Ù, BNC 16 1. Composite: 1.0Vp-p/75Ù, BNC 1 2. -
Page 50: Appendix 2 Trouble Shooting
Network Digital Video Recorder Operation Manual ( V3.0 ) Appendix 2 Trouble shooting Fault phenomena Fault cause Solution After connecting to power and powering 1. Power lines aren't connected well. Check the power line and the power socket on, the panel indicator light is not on 2.
Need help?
Do you have a question about the DLB5208 and is the answer not in the manual?
Questions and answers