Count Rules; Allow Decimals; Round Method; Round Position - NTS -3000 User Manual

2.6 Count Rules

Users can customize decimal count rules. In the count rules, users can define decimal digits
number, round method and round position.
Settings
======= =======
Pay Way Settings
In "Settings" interface, select "Count Rules" and press
Count Rules
Other Settings "Enter" to enter into count rule setting interfaces.
Language Selection

2.6.1 Allow Decimals

Count Rules
===== =====
In "Count Rules" interface, the first option is to define
Allow Decimals(0 3):
2
decimal digits used in registration and report. Here we

Round Method

can select from 0 to 3.

Round Position

2.6.2 Round Method
Count Rules
==== ====
Allow Decimals(0 3):
1. In "Count Rules" interface, select "Round Method"
1
2
option and press "Enter";
Round Method
Round Position
===== Round Method ====
Round off:
2. In "Round Method" interface, there are 6 round methods
2
4/5:
option for selection.
Round Up:
Europe 0/5/10:
===== Round Method ====
Singapore 0/5:
Singapore2 0/5/10:
NOTICE: Explanation for round methods.
A. Round off: cut off all fraction values;
B. 4/5: round off fractions less than 5 and carry in when fractions equal toor larger than 5;
C. Round up: carry in for any fractions;
D. European 0/5/10
E. Singapore 0/5
F. Singapore 2 0/5/10
ECR User`s Manual
2.6.3 Round Position
Users could define decimal round position. There are options for Integer, the first decimal, the
second decimal and the third decimal.
==== Count Rules ====
Allow Decimals(0 3):
1. In "Count Rules" interface, select "Round Position" option
1
2
and press "Enter" to select position;
Round Method
Round Position
Round Position
Units:
2
The 1st decimal: 2. Select the position and press "Enter" to confirm.
The 2st decimal:
The 3rd decimal:
ECR User`s Manual