Removing The Cd Tray Fitting - JVC MX-J100 Service Manual

MX-J100

Removing the CD Tray fitting

Prior to performing the following procedure, remove
the top cover and the side covers.
ATTENTION: Be sure to remove the CD tray fitting
before removing the CD changer unit.
1. Press the POWER button. Press the OPEN/CLOSE
button to eject the CD tray.
2. Move the CD tray fitting upward and release the joint
b.
3. Press the OPEN/CLOSE button to insert the tray.
Removing the CD Tray fitting
- How to eject the CD tray without turning on power -
1. Turn the black loading pulley gear marked c from the
back of the CD changer unit as shown in Fig.7 and
draw the CD tray toward the front.
2. Move the CD tray fitting upward and release the joint
b.
3. Push and insert the CD tray manually.
Marked c
Loading pulley gear
1-6
(See Fig. 4 to 6)
(See Fig. 5 to 7)
This slot of the board.
Fig.7
CD tray
POWER button
CD tray fitting
Joint b
CD tray
OPEN/CLOSE button
Fig.4
Joint b
Fig.5
Fig.6