Custom Function Settings; C.fn I: Exposure - Canon EOS 650D Instruction Manual

3
Custom Function SettingsN
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn
IV: Operation/Others.

C.Fn I: Exposure

C.Fn-1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure Sets 1/2-stop increments for the shutter speed, aperture, exposure Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is effective compensation, AEB, flash exposure compensation, etc. This is effective compensation, AEB, flash exposure compensation, etc. This is effective
when you prefer to control the exposure in less fine increments than 1/3- when you prefer to control the exposure in less fine increments than 1/3- when you prefer to control the exposure in less fine increments than 1/3-
stop increments.
With setting 1, the exposure level will be displayed in the viewfinder and on With setting 1, the exposure level will be displayed in the viewfinder and on With setting 1, the exposure level will be displayed in the viewfinder and on
the LCD monitor as shown below.
C.Fn-2 C.Fn-2 C.Fn-2
0: Off
1: On
When you set the ISO speed, you will be able to set " When you set the ISO speed, you will be able to set "H" (equivalent to When you set the ISO speed, you will be able to set "
ISO 25600) for still photos and "H" (equivalent to ISO 12800) for movies. ISO 25600) for still photos and " ISO 25600) for still photos and "
Note that if [C.Fn-3: Highlight tone priority] is set to [1: Enable], "H" C.Fn-3: Highlight tone priority C.Fn-3: Highlight tone priority
cannot be set.
294
Exposure level increments
ISO expansion ISO expansion ISO expansion