Canon EOS 650D Instruction Manual page 207

Text Entry Procedure

Entering text:
In the bottom area, press the <S> key or turn the <6> dial to
select a character, then press <0> to enter it.

Changing the entry mode:*
Select [ Select [ Select [
time you press <0>, the entry mode will change as follows: Lower
case  Numerals / Symbols 1  Numerals / Symbols 2  Upper
Numerals / Symbols 1 Numerals / Symbols 1
case.
* When [Touch control: Disable] is set, you can display all the Touch control: Disable Touch control: Disable
available characters on one screen. available characters on one screen. available characters on one screen.

Deleting a character: Deleting a character: Deleting a character:
L
Press the <L> button to delete one character. Press the < Press the <L

Exiting:
Press the <M> button, check the text, select [OK], then press
<0>. The screen in step 2 will reappear.

Canceling the text entry:
Press the <M> button, check the text, select [OK], then press
<0>. The screen in step 2 will reappear.
You can also set or check the copyright information with EOS Utility
(provided software, p.350).


] at the bottom right of the bottom entry area. Each ] at the bottom right of the bottom entry area. Each ] at the bottom right of the bottom entry area. Each
>, the entry mode will change as follows: Lower >, the entry mode will change as follows: Lower
> button to delete one character. > button to delete one character.
Changing the entry area:
Press the <Q> button to toggle
between the top and bottom entry
areas.
Moving the cursor:
Press the <U> key to move the
cursor.
> key or turn the < > key or turn the <
> to enter it. > to enter it.
 
Numerals / Symbols 2 Numerals / Symbols 2
Handy Features
207